Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

2

  • Earcup
  • 3 steps
  • Volume Switch
  • 2 steps

Flags

0

  • BackCorsair Void Pro RGB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

All steps for replacing the volume switch should be applied to the lefthand earcup..

What you need

Step 1

              Earcup
  • Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

1024

Step 2

  • Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.
  • If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.

If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

Step 3

  • Remove and set aside the black panel, taking care to keep the wires attached.
  • The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

Remove and set aside the black panel, taking care to keep the wires attached.

The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

Step 4

              Volume Switch
  • Using the Phillips #0 screwdriver, remove the three 6.4 mm screws on the black plastic panel with the grid of holes.

Using the Phillips #0 screwdriver, remove the three 6.4 mm screws on the black plastic panel with the grid of holes.

Step 5

  • Pull the volume switch out and remove it from the device.

Pull the volume switch out and remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Gianna Nobili

Member since: 04/15/2019

809 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S9-G13, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S9-G13, Maness Spring 2019 



                    CPSU-MANESS-S19S9G13                     


                                            4 Members                     


                                            12 Guides authored