Difficulty

Moderate

Steps

5

Time Required

                          1 hour

Sections

2

  • Earcup
  • 3 steps
  • Speakers
  • 2 steps

Flags

0

  • BackCorsair Void Pro RGB

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Earcup
  • Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

1024

Step 2

  • Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.
  • If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.

If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

Step 3

  • Remove and set aside the black panel, taking care to keep the wires attached.
  • The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

Remove and set aside the black panel, taking care to keep the wires attached.

The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

Step 4

              Speakers
  • Desolder the wire that connects to the speaker.
  • For steps on how to solder, see this helpful guide.

Desolder the wire that connects to the speaker.

For steps on how to solder, see this helpful guide.

Step 5

  • Use a knife tool as a wedge to remove the speaker and glue in the new speaker.

Use a knife tool as a wedge to remove the speaker and glue in the new speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Gianna Nobili

Member since: 04/15/2019

809 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S9-G13, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S9-G13, Maness Spring 2019 



                    CPSU-MANESS-S19S9G13                     


                                            4 Members                     


                                            12 Guides authored

brunodehulster - Apr 24, 2020

Reply

Where can i find a new speaker ?

ksmith - Oct 30, 2020

Reply

The speaker listed in the parts, is not the correct speaker. I purchased them and they are NOT a fit.

smack2k - Jan 18, 2021

Reply

Whats the size of the speaker?

noahoryan - Jun 30, 2021

The size of the speaker is 50 mm and about 10 mm in depth. I used this speaker in my own repair and it worked well.

Jason HKB - Feb 6, 2021

Reply

Can u show how to change “Charging Port”??