Difficulty
Easy
Steps
3
Time Required
2 minutes
Sections
1
- Earcup
- 3 steps
Flags
0
BackCorsair Void Pro RGB
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Earcup
- Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.
Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.
1024
Step 2
- Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.
- If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.
Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.
If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.
Step 3
- Remove and set aside the black panel, taking care to keep the wires attached.
- The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.
Remove and set aside the black panel, taking care to keep the wires attached.
The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Elizabeth Claypool
Member since: 04/15/2019
490 Reputation
1 Guide authored
Badges:
10
+7 more badges
Team
Cal Poly, Team S9-G13, Maness Spring 2019
Member of Cal Poly, Team S9-G13, Maness Spring 2019
CPSU-MANESS-S19S9G13
4 Members
12 Guides authored