Coolpix S01 Zoom Trigger Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Zoom Trigger
4 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

BackNikon Coolpix S01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Zoom Trigger

Before starting, make sure the camera is powered off.
Take the Hex and PH000 bit to remove a 2mm screw from the left side of the camera.
Next, remove the 2mm screw from the right side.
Lastly, remove the 3mm screw from the bottom of the camera.

Before starting, make sure the camera is powered off.

Take the Hex and PH000 bit to remove a 2mm screw from the left side of the camera.

Next, remove the 2mm screw from the right side.

Lastly, remove the 3mm screw from the bottom of the camera.

1024

Step 2

Once the two 2mm screws and the 3 mm screw have been removed, use the smallest plastic opening tool and pull up on the sides to reveal the inside of the camera.
Be sure to remove the battery before continuing your repair.

Once the two 2mm screws and the 3 mm screw have been removed, use the smallest plastic opening tool and pull up on the sides to reveal the inside of the camera.

Be sure to remove the battery before continuing your repair.

Step 3

After the battery is out, remove the gray button bar from the top of the camera with the smallest opening tool.
With the gray bar detached from the camera, turn it upside down. With the Hex and the J000 bit remove the two 1mm screws.

After the battery is out, remove the gray button bar from the top of the camera with the smallest opening tool.

With the gray bar detached from the camera, turn it upside down. With the Hex and the J000 bit remove the two 1mm screws.

Step 4

Take the needle nose tweezers to remove the black ring in the middle of the button.
You have successfully removed the zoom trigger and can replace with a new one if needed.
To reassemble follow steps in reverse.

Take the needle nose tweezers to remove the black ring in the middle of the button.

You have successfully removed the zoom trigger and can replace with a new one if needed.

To reassemble follow steps in reverse.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    angelica fitzgerald

Member since: 10/13/2015

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Sam Houston State, Team 2-3, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 2-3, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S2G3                     


                                            4 Members                     


                                            9 Guides authored

Missing Details#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Missing Details

Introduction

What you need

Team