Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • The power button won’t turn on
  • 4 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackNikon Coolpix S01

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              The power button won't turn on
  • First make sure the camera is powered off.
  • Then take the Hex and PH000 bit to remove a 2mm screw on the left side of the camera.
  • Next, remove the 2mm screw on the right side of the camera.

First make sure the camera is powered off.

Then take the Hex and PH000 bit to remove a 2mm screw on the left side of the camera.

Next, remove the 2mm screw on the right side of the camera.

1024

Step 2

  • Remove the 3mm screw from the bottom of the camera.
  • Once the 2mm and 3mm screws are removed, use the plastic opening tool to lift the sides of the camera and reveal the inside of the camera.
  • Be sure to remove the battery before continuing to repair.

Remove the 3mm screw from the bottom of the camera.

Once the 2mm and 3mm screws are removed, use the plastic opening tool to lift the sides of the camera and reveal the inside of the camera.

Be sure to remove the battery before continuing to repair.

Step 3

  • After the battery is out, remove the gray button bar from the top of the camera with the smallest opening tool.
  • With the gray bar detached from the camera, turn it upside down. Using the hex and the J000 bit remove the two 1mm screws.
  • Take the needle nose tweezers to remove the power button.

After the battery is out, remove the gray button bar from the top of the camera with the smallest opening tool.

With the gray bar detached from the camera, turn it upside down. Using the hex and the J000 bit remove the two 1mm screws.

Take the needle nose tweezers to remove the power button.

Step 4

  • You have successfully removed the power button and can replace it if needed.

You have successfully removed the power button and can replace it if needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Rieana Hayes

Member since: 10/13/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Sam Houston State, Team 2-3, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 2-3, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S2G3                     


                                            4 Members                     


                                            9 Guides authored