Coolpix S01 Screen Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Screen Cover
4 steps

Flags

BackNikon Coolpix S01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen Cover

First make sure the camera is powered off.
Use the Hex and PH000 tool to remove the 2 mm screw from the left side of the camera.

First make sure the camera is powered off.

Use the Hex and PH000 tool to remove the 2 mm screw from the left side of the camera.

1024

Step 2

Next, remove the 2 mm screw from the right side of the camera
Remove the 3mm screw from the bottom of the camera.
Once you have the 2mm and 3mm screws out, gently pull the sides up with the smallest plastic opening tool. This will reveal the inside of the camera.
Be sure to remove the battery before continuing your repair.

Next, remove the 2 mm screw from the right side of the camera

Remove the 3mm screw from the bottom of the camera.

Once you have the 2mm and 3mm screws out, gently pull the sides up with the smallest plastic opening tool. This will reveal the inside of the camera.

Be sure to remove the battery before continuing your repair.

Step 3

With the screen facing outward, locate the orange ribbon cable from the motherboard.
With the straight tweezers, gently pull out the orange ribbon cable from the motherboard.

With the screen facing outward, locate the orange ribbon cable from the motherboard.

With the straight tweezers, gently pull out the orange ribbon cable from the motherboard.

Step 4

With the lens facing down and the bottom of the camera facing away from you, lift up the right edge of the LCD screen.
Use the plastic tool to gently lift the screen out from the upper left corner until the seal is broken.

With the lens facing down and the bottom of the camera facing away from you, lift up the right edge of the LCD screen.

Use the plastic tool to gently lift the screen out from the upper left corner until the seal is broken.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    angelica fitzgerald

Member since: 10/13/2015

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Sam Houston State, Team 2-3, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 2-3, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S2G3                     


                                            4 Members                     


                                            9 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team