Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Rotating Lens
- 4 steps
Flags
0
BackContour Roam2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rotating Lens
- Using the phillips head screwdriver (PH000) locate and remove the 4.45mm (.175in) screw by the 180 degree graphic on the metal ring.
- The screws in the camera are very small and can strip very easily. Apply consistent pressure when removing screws.
Using the phillips head screwdriver (PH000) locate and remove the 4.45mm (.175in) screw by the 180 degree graphic on the metal ring.
The screws in the camera are very small and can strip very easily. Apply consistent pressure when removing screws.
1024
Step 2
- Rotate the metal ring counterclockwise until completely removed.
Rotate the metal ring counterclockwise until completely removed.
Step 3
- Use a spudger to pry up the black rubber ring around the lens cover.
- The black rubber ring is vey thin and can easily tear. Use caution when removing.
Use a spudger to pry up the black rubber ring around the lens cover.
The black rubber ring is vey thin and can easily tear. Use caution when removing.
Step 4
- Remove and replace the lens cover.
Remove and replace the lens cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Matthew Kofsky
Member since: 03/11/2015
548 Reputation
3 Guides authored
Badges:
17
+14 more badges
Team
Colorado Springs, Team 4-5, Panko Spring 2015
Member of Colorado Springs, Team 4-5, Panko Spring 2015
UCCS-PANKO-S15S4G5
3 Members
10 Guides authored