Conair Infiniti Pro Model 259Np On Off Button Replacement Repair Guide

Difficulty

Difficult

Steps

7

Time Required

                          20 - 30 minutes            

Sections

3

• Back Panel
• 3 steps
• Fan Motor Assembly
• 2 steps
• On/Off Button
• 2 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

• BackConair Infiniti Pro Model 259NP

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Note: This guide requires soldering skills. If you don’t know how to solder or want to brush up on your skills check out this handy tutorial.

What you need

Step 1

              Back Panel               

• Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
• Hold the hair dryer by the handle so that the back panel faces up.

Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

Hold the hair dryer by the handle so that the back panel faces up.

1024

Step 2

• Remove the two 15.875 mm Phillips #2 screws from the back panel.

Remove the two 15.875 mm Phillips #2 screws from the back panel.

Step 3

• Starting from where the cord attaches to the handle, pull apart the two plastic panels.
• Continue separating the back panel, working along the seam.
• With moderate force, completely remove the back panel from the hair dryer.

Starting from where the cord attaches to the handle, pull apart the two plastic panels.

Continue separating the back panel, working along the seam.

With moderate force, completely remove the back panel from the hair dryer.

Step 4

              Fan Motor Assembly               

• Hold the hair dryer by the nozzle so that the handle points to the left.
• Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

Hold the hair dryer by the nozzle so that the handle points to the left.

Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

Step 5

• Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.
• Pull on the back of the fan motor to gently lift the motor out of the hair dryer.
• Lift the attached electrical wiring and heat shield completely out of the hair dryer.

Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

Lift the attached electrical wiring and heat shield completely out of the hair dryer.

Step 6

              On/Off Button               

• Caution: Do not attempt to open or tamper with the capacitor. You may suffer severe electrical shocks.
• Hold the electrical switches so that the wires are facing upwards.

Caution: Do not attempt to open or tamper with the capacitor. You may suffer severe electrical shocks.

Hold the electrical switches so that the wires are facing upwards.

Step 7

• Focus on the button directly next to the cylindrical capacitor.
• Desolder the button at the circled locations.
• New line.

Focus on the button directly next to the cylindrical capacitor.

Desolder the button at the circled locations.

New line.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Timothy Lo                     

Member since: 04/22/2014

966 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 10-58, Amido Spring 2014                        

                                                  Member of Cal Poly, Team 10-58, Amido Spring 2014 



                    CPSU-AMIDO-S14S10G58                     


                                            4 Members                     


                                            7 Guides authored