Difficulty

Moderate

Steps

8

Time Required

                          20 - 30 minutes

Sections

4

  • Housing
  • 3 steps
  • Power Cord
  • 1 step
  • Motherboard
  • 3 steps
  • Heating Element
  • 1 step

Flags

0

  • BackConair Infiniti PRO Curling Iron

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Housing
  • Remove the Philips #1 28 mm.
  • Make sure device is unplugged and cool before attempting to replace parts.

Remove the Philips #1 28 mm.

Make sure device is unplugged and cool before attempting to replace parts.

1024

Step 2

  • Remove the Philips #1 22 mm screws.

Remove the Philips #1 22 mm screws.

Step 3

  • Pry off the housing using a plastic spudger.

Pry off the housing using a plastic spudger.

Step 4

              Power Cord
  • Pull power chord out.

Pull power chord out.

Step 5

              Motherboard
  • Heat up your soldering gun and desolder the red wire from the motherboard as shown.
  • Note the location of wire attachment.

Heat up your soldering gun and desolder the red wire from the motherboard as shown.

Note the location of wire attachment.

Step 6

  • With your soldering gun, desolder the white wire from the motherboard as shown.
  • Note the location of wire attachment.

With your soldering gun, desolder the white wire from the motherboard as shown.

Step 7

  • Once both wires are desoldered the motherboard can be removed.

Once both wires are desoldered the motherboard can be removed.

Step 8

              Heating Element
  • Remove the heating element mount. This will free up the heating element barrel for replacement.

Remove the heating element mount. This will free up the heating element barrel for replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Jonathon Bruer

Member since: 11/09/2017

589 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S7-G5, Baechle Fall 2017                        

                                                  Member of IUPUI, Team S7-G5, Baechle Fall 2017 



                    IUPUI-BAECHLE-F17S7G5                     


                                            3 Members                     


                                            5 Guides authored