Difficulty
Difficult
Steps
4
Time Required
15 - 45 minutes
Sections
1
- Battery
- 4 steps
Flags
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackComputer King Muffin Kinder 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Make sure to power off the device before you begin to take apart your device. Not doing so could potentially cause harm.
What you need
Step 1
Battery
- Use the plastic opening tool help push out the microSD card from the microSD slot.
Use the plastic opening tool help push out the microSD card from the microSD slot.
1024
Step 2
- Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.
Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.
Step 3
- The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic.
The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic.
Step 4
- Unsolder the red and black wires that are connected to the battery from the logic board using a soldering iron.
- Tips on how to solder can be found here.
Unsolder the red and black wires that are connected to the battery from the logic board using a soldering iron.
Tips on how to solder can be found here.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Katherine
Member since: 01/22/2015
412 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
UWT Liner: Group 2
Member of UWT Liner: Group 2
Community
4 Members
6 Guides authored