Compaq Presario V2414Nr Ram Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 minutes

Sections

Battery
2 steps
RAM Cover
1 step
RAM
1 step

Flags

BackCompaq Presario V2414NR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Shutdown the computer.
Remove all external devices.
Unplug the power, and any other cords, from the laptop.
Turn the laptop upside down, with the front towards you.

Shutdown the computer.

Remove all external devices.

Unplug the power, and any other cords, from the laptop.

Turn the laptop upside down, with the front towards you.

1024

Step 2

Slide the battery release latch to the left until the battery pops up.
Lift the front edge of the battery pack and swing it back to remove it.
When reassembling, first align the back of the battery with the chassis, then press the front downwards until it latches.

Slide the battery release latch to the left until the battery pops up.

Lift the front edge of the battery pack and swing it back to remove it.

When reassembling, first align the back of the battery with the chassis, then press the front downwards until it latches.

Step 3

              RAM Cover

Loosen the two 5mm Phillips #1 screws that secure the memory module compartment cover to the computer.
These screws are captured to the cover panel.
Lift the front edge of the memory module compartment cover and swing it back to remove it.

Loosen the two 5mm Phillips #1 screws that secure the memory module compartment cover to the computer.

These screws are captured to the cover panel.

Lift the front edge of the memory module compartment cover and swing it back to remove it.

Step 4

RAM

Use your fingers, or plastic opening tools, to spread the metal retaining tabs on each side of the RAM outwards until the module pops up.
Pull the module out of the socket at the same angle it is now oriented.
Repeat these steps to remove the second memory module.
When reassembling, align the offset notch on the RAM contacts with the tab on the socket and insert at a 30 degree angle.

Use your fingers, or plastic opening tools, to spread the metal retaining tabs on each side of the RAM outwards until the module pops up.

Pull the module out of the socket at the same angle it is now oriented.

Repeat these steps to remove the second memory module.

When reassembling, align the offset notch on the RAM contacts with the tab on the socket and insert at a 30 degree angle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Rylie Schmidt

Member since: 04/19/2015

765 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 2-1, Isaacson Fall 2016                        

                                                  Member of UMass Dartmouth, Team 2-1, Isaacson Fall 2016 



                    UMASSD-ISAACSON-F16S2G1                     


                                            3 Members                     


                                            9 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team