Compaq Presario V2414Nr Optical Drive Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 minutes

Sections

Battery
2 steps
Optical Drive
2 steps

Flags

BackCompaq Presario V2414NR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Shutdown the computer.
Remove all external devices.
Unplug the power, and any other cords, from the laptop.
Turn the laptop upside down, with the front towards you.

Shutdown the computer.

Remove all external devices.

Unplug the power, and any other cords, from the laptop.

Turn the laptop upside down, with the front towards you.

1024

Step 2

Slide the battery release latch to the left until the battery pops up.
Lift the front edge of the battery pack and swing it back to remove it.
When reassembling, first align the back of the battery with the chassis, then press the front downwards until it latches.

Slide the battery release latch to the left until the battery pops up.

Lift the front edge of the battery pack and swing it back to remove it.

When reassembling, first align the back of the battery with the chassis, then press the front downwards until it latches.

Step 3

              Optical Drive

On the optical drive there is small pin hole. Insert a paperclip or similarly sized object in the hole.
The Drive will pop a short way out of the computer.

On the optical drive there is small pin hole. Insert a paperclip or similarly sized object in the hole.

The Drive will pop a short way out of the computer.

Step 4

Remove the 7mm Phillips #1 screw that secures the optical drive to the computer.
Grip the sides of the Optical Drive and slide it out until it is completely removed from the computer.
When reassembling, slide the optical drive straight in until it clicks.

Remove the 7mm Phillips #1 screw that secures the optical drive to the computer.

Grip the sides of the Optical Drive and slide it out until it is completely removed from the computer.

When reassembling, slide the optical drive straight in until it clicks.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Rylie Schmidt

Member since: 04/19/2015

765 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 2-1, Isaacson Fall 2016                        

                                                  Member of UMass Dartmouth, Team 2-1, Isaacson Fall 2016 



                    UMASSD-ISAACSON-F16S2G1                     


                                            3 Members                     


                                            9 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team