Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

  • Speaker
  • 9 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackCompaq iPAQ Pocket PC 3830

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.

Remove the four 0.8mm Phillips # 00 screws from the back board using the screwdriver from your tool kit.

1024

Step 2

  • Once the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.

Once the backboard is removed, remove the four screws on the motherboard. Two on top of the motherboard and two on the bottom of the motherboard using the Phillips screwdriver.

Step 3

  • Detach the two pairs of wires, found on the top right of the motherboard, from their combs using the tweezers from the toolkit.

Detach the two pairs of wires, found on the top right of the motherboard, from their combs using the tweezers from the toolkit.

Step 4

  • In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers.

In order to get to the speaker, try to free the motherboard by removing all the wires from their combs using the tweezers.

Step 5

  • Use tweezers to remove wires from combs.

Use tweezers to remove wires from combs.

Step 6

  • Use your tweezers to free wire from comb in order to free the motherboard.

Use your tweezers to free wire from comb in order to free the motherboard.

Step 7

  • Once you have all the wires freed from the combs, you can detach the motherboard just by lifting it out of place.

Once you have all the wires freed from the combs, you can detach the motherboard just by lifting it out of place.

Step 8

  • Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length.

Unscrew the two Phillips #00 screws to get the speaker loose using a Phillips screwdriver. The screws measure 0.3 mm in length.

Step 9

  • Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers.

Once the two screws that hold the speaker in place are removed, remove the speaker using tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Sedina Cavcic

Member since: 09/05/2014

437 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014                        

                                                  Member of USF Sarasota-Manatee, Team 1-1, Stewart Fall 2014 



                    USFSM-STEWART-F14S1G1                     


                                            3 Members                     


                                            7 Guides authored