Difficulty
Moderate
Steps
20
Time Required
20 minutes
Sections
4
- LED Cover
- 8 steps
- Keyboard
- 3 steps
- Palm Rest
- 7 steps
- Floppy Drive
- 2 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Missed a Step
Oops! This guide is currently missing some important steps.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackCompaq Evo N1000v
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LED Cover
- Turn the laptop bottom side up with the rear panel facing forward.
Turn the laptop bottom side up with the rear panel facing forward.
1024
Step 2
- Remove the two T8 Torx screws that secure the LED cover to the base enclosure.
Remove the two T8 Torx screws that secure the LED cover to the base enclosure.
Step 3
- Turn the laptop top side up with the front facing forward. Open the screen.
Turn the laptop top side up with the front facing forward. Open the screen.
Step 4
- Locate the F1 and F2 keys near the top left corner of the keyboard.
Locate the F1 and F2 keys near the top left corner of the keyboard.
Step 5
- While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
Step 6
- Locate the Pause and Scroll keys near the top right corner of the keyboard.
Locate the Pause and Scroll keys near the top right corner of the keyboard.
Step 7
- While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.
Step 8
- Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.
Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.
Step 9
Keyboard
- Lift the back edge of the keyboard and pull towards the screen.
Lift the back edge of the keyboard and pull towards the screen.
Step 10
- Pull the cable and lift up to release.
Pull the cable and lift up to release.
Step 11
- Remove the keyboard.
Remove the keyboard.
Step 12
Palm Rest
- Flip the computer bottom side up with the rear facing forward.
Flip the computer bottom side up with the rear facing forward.
Step 13
- Remove the six screws shown in picture.
Remove the six screws shown in picture.
Step 14
- Remove battery and then remove screw in metal support on case edge
- Flip the computer top side up with the front facing you.
Remove battery and then remove screw in metal support on case edge
Flip the computer top side up with the front facing you.
Step 15
- Lift up the palm rest from the front edge and swing it towards the screen.
Lift up the palm rest from the front edge and swing it towards the screen.
Step 16
- Locate the first connector. Disconnect by firmly pulling up.
Locate the first connector. Disconnect by firmly pulling up.
Step 17
- Locate the second connector. Remove by firmly pulling up.
Locate the second connector. Remove by firmly pulling up.
Step 18
- Remove the palm rest.
Remove the palm rest.
Step 19
Floppy Drive
- Locate and remove the three screws shown in picture.
Locate and remove the three screws shown in picture.
Step 20
- Lift up and remove floppy drive from the palm rest.
Lift up and remove floppy drive from the palm rest.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Alex Hernandez
Member since: 04/14/2010
46 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 29-74, Johann Spring 2010
Member of Cal Poly, Team 29-74, Johann Spring 2010
CPSU-JOHANN-S10S29G74
3 Members
14 Guides authored
