Comnet Ericsson Panther 600P Speaker Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Battery
1 step
Exterior Case
3 steps
Speaker
3 steps

Flags

BackComNet Ericsson Panther 600P
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Locate the release button.

Look for the release button on the back of the radio.
Press the button and pull down on the battery at the same time. The battery will come free.

Look for the release button on the back of the radio.

Press the button and pull down on the battery at the same time. The battery will come free.

1024

Step 2

              Antenna

Twist the antenna counter-clockwise to unscrew it from the antenna jack.

Twist the antenna counter-clockwise to unscrew it from the antenna jack.

Step 3

              Dials

Pull up on the dials to remove them from the underlying pegs.

Pull up on the dials to remove them from the underlying pegs.

Step 4

              Exterior Case

Using a T15 Torx screwdriver, unscrew the two screws.
Using a plastic opening tool, pry the internal case from the external case.

Using a T15 Torx screwdriver, unscrew the two screws.

Using a plastic opening tool, pry the internal case from the external case.

Step 5

              Speaker

Locate the device’s speaker inside the front panel of the exterior case.
Locate the display and speaker stabilizer.
Lift the stabilizer up from the bottom and pull the stabilizer out of case.

Locate the device’s speaker inside the front panel of the exterior case.

Locate the display and speaker stabilizer.

Lift the stabilizer up from the bottom and pull the stabilizer out of case.

Step 6

Locate the two 3.75mm screws holding the speaker to the exterior case.
Using a T15 Torx screwdriver, unscrew the 3.75mm screws.

Locate the two 3.75mm screws holding the speaker to the exterior case.

Using a T15 Torx screwdriver, unscrew the 3.75mm screws.

Step 7

Lift up on the bottom of the speaker to detach the speaker.
Pull the speaker out of the case.

Lift up on the bottom of the speaker to detach the speaker.

Pull the speaker out of the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Kellan Sells

Member since: 01/13/2015

318 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team 1-2, Carnegie Winter 2015                        

                                                  Member of Eastern Washington University, Team 1-2, Carnegie Winter 2015 



                    EWU-CARNEGIE-W15S1G2                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team