Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 1 step
  • Exterior Case
  • 3 steps
  • Display
  • 3 steps

Flags

0

  • BackComNet Ericsson Panther 600P

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Locate the release button.
  • Look for the release button on the back of the radio.
  • Press the button and pull down on the battery at the same time. The battery will come free.

Look for the release button on the back of the radio.

Press the button and pull down on the battery at the same time. The battery will come free.

1024

Step 2

              Antenna
  • Twist the antenna counter-clockwise to unscrew it from the antenna jack.

Twist the antenna counter-clockwise to unscrew it from the antenna jack.

Step 3

              Dials
  • Pull up on the dials to remove them from the underlying pegs.

Pull up on the dials to remove them from the underlying pegs.

Step 4

              Exterior Case
  • Using a T15 Torx screwdriver, unscrew the two screws.
  • Using a plastic opening tool, pry the internal case from the external case.

Using a T15 Torx screwdriver, unscrew the two screws.

Using a plastic opening tool, pry the internal case from the external case.

Step 5

              Front Case - Internal
  • Using the plastic opening tool, pry the case apart.

Using the plastic opening tool, pry the case apart.

Step 6

              Ribbon
  • The keypad chip is attached to the motherboard by a ribbon.
  • Pull ribbon with tweezers to detach from back panel.

The keypad chip is attached to the motherboard by a ribbon.

Pull ribbon with tweezers to detach from back panel.

Step 7

              Screen
  • Screen will be attached by a ribbon.
  • Pull screen up and away from motherboard to detach.

Screen will be attached by a ribbon.

Pull screen up and away from motherboard to detach.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Daniel

Member since: 01/13/2015

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team 1-2, Carnegie Winter 2015                        

                                                  Member of Eastern Washington University, Team 1-2, Carnegie Winter 2015 



                    EWU-CARNEGIE-W15S1G2                     


                                            4 Members                     


                                            6 Guides authored