Difficulty
Easy
Steps
3
Time Required
3 - 5 minutes
Sections
1
- Fuse(s)
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMultimeter
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Turn off multimeter and unplug the two leads.
- Turn the dial until the little green mark is set on the “OFF” option. Next disconnect the two testing leads by simply pulling them away from the body. Set these aside for later.
Turn the dial until the little green mark is set on the “OFF” option. Next disconnect the two testing leads by simply pulling them away from the body. Set these aside for later.
1024
Step 2
Unscrew the four phillips screws that hold the back panel
- Unscrew the four Phillips screws that hold the back panel and carefully open it from either side and lay it besides the main body, try not to break the top led cable.
- Disconnect the top led cable from the PCB and move everything aside.
Unscrew the four Phillips screws that hold the back panel and carefully open it from either side and lay it besides the main body, try not to break the top led cable.
Disconnect the top led cable from the PCB and move everything aside.
Step 3
Swap out the fuses
- Swap the blown fuses out for new ones and you’re done!
Swap the blown fuses out for new ones and you’re done!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
DeZom
Member since: 02/12/2022
664 Reputation
1 Guide authored
Badges:
9
+6 more badges