Difficulty
Easy
Steps
5
Time Required
15 - 20 minutes
Sections
1
- Motor
- 5 steps
Flags
0
BackComfort Zone CZ6C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motor
- Make sure to unplug the Comfort Zone CZ6C before replacing the motor. This will prevent the risk of electrocution.
- Unscrew the main housing screw located right above the main switch using a Phillips screwdriver.
- Then use gentle force to remove the main housing door.
- Remember to keep track of your screws!
Make sure to unplug the Comfort Zone CZ6C before replacing the motor. This will prevent the risk of electrocution.
Unscrew the main housing screw located right above the main switch using a Phillips screwdriver.
Then use gentle force to remove the main housing door.
Remember to keep track of your screws!
1024
Step 2
- Unscrew the two adjacent housing screws to free the motor cage from the housing.
Unscrew the two adjacent housing screws to free the motor cage from the housing.
Step 3
- Remove the motor cage from the fan housing.
Remove the motor cage from the fan housing.
Step 4
- Unscrew the two adjacent motor cage screws to free the motor
Unscrew the two adjacent motor cage screws to free the motor
Step 5
- The motor is now free to be replaced.
- If the motor will not move out of its now freed state you can use WD-40 to loosen it
The motor is now free to be replaced.
If the motor will not move out of its now freed state you can use WD-40 to loosen it
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 5 other contributors
Gage Wilson
Member since: 04/08/2015
217 Reputation
1 Guide authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 17-5, Forte Spring 2015
Member of Cal Poly, Team 17-5, Forte Spring 2015
CPSU-FORTE-S15S17G5
4 Members
5 Guides authored
