Coleman Rechargeable Fluorescent Twin Tube Battery Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Battery
• 4 steps

Flags

0

• BackColeman Rechargeable Fluorescent Twin Tube

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Carefully turn the lantern upside down.
• Remove the three 1.2 mm Phillips #0 screws from the base of the lantern.

Carefully turn the lantern upside down.

Remove the three 1.2 mm Phillips #0 screws from the base of the lantern.

1024

Step 2

• Carefully pull the bottom of the lantern to remove the base from the device.

Carefully pull the bottom of the lantern to remove the base from the device.

Step 3

• Gently pull the battery out of the slot and away from the base.
• The battery may be held into place by adhesive strips.

Gently pull the battery out of the slot and away from the base.

The battery may be held into place by adhesive strips.

Step 4

• Carefully detach the negative wire from the battery terminal first.
• Next, detach the positive wire from the battery terminal.

Carefully detach the negative wire from the battery terminal first.

Next, detach the positive wire from the battery terminal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Sean                     

Member since: 09/17/2018

265 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Washington State, Team S2-G1, Hope Fall 2018                        

                                                  Member of Washington State, Team S2-G1, Hope Fall 2018 



                    WSU-HOPE-F18S2G1                     


                                            4 Members                     


                                            4 Guides authored                     

BilMcKelvy - Aug 29, 2019

Reply

Sean, I’m facing a dead battery in my Coleman twin tube fluorescent lantern also. Your directions are spot on except my battery seems to be glued in with super glue! I’ve tried a heat gun and all my strength but my battery won’t come loose. I find it hard to pry under the battery because of the shape of the plastic partitions around the battery. How did you get the battery unstuck?