Difficulty
Moderate
Steps
4
Time Required
15 - 20 minutes
Sections
1
- Motherboard
- 4 steps
Flags
0
BackColecoVision
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Start by laying the console face down.
- Remove the eight 15mm Phillips #1 screws from the bottom of the device.
Start by laying the console face down.
Remove the eight 15mm Phillips #1 screws from the bottom of the device.
1024
Step 2
- Flip the console back over.
- Lift the front panel off. I would reccomended using a metal spudger along the rim of the top to safely remove it and set it aside.
Flip the console back over.
Lift the front panel off. I would reccomended using a metal spudger along the rim of the top to safely remove it and set it aside.
Step 3
- Remove the two 15mm Phillips #1 screws holding the casing in place.
- Carefully lift the casing from the motherboard.
Remove the two 15mm Phillips #1 screws holding the casing in place.
Carefully lift the casing from the motherboard.
Step 4
- Remove the center Phillips #1 screw near the cartridge slot.
- Remove the second Phillips #1 screw near the RAM chips.
- Carefully lift and remove the motherboard.
Remove the center Phillips #1 screw near the cartridge slot.
Remove the second Phillips #1 screw near the RAM chips.
Carefully lift and remove the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Krystalina
Member since: 10/24/2018
121 Reputation
1 Guide authored
Badges:
3
Team
UW Tacoma, Team S1-G2, Rose Fall 2018
Member of UW Tacoma, Team S1-G2, Rose Fall 2018
UWT-ROSE-F18S1G2
4 Members
12 Guides authored
