Coby Kyros Mid9742 Screen Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Outer Casing
3 steps
Screen
3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackCoby Kyros MID9742
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Outer Casing

Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

1024

Step 2

Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

Step 3

Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.
Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.
Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.

Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.

Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

Step 4

              Screen

Using the PH00 screwdriver unscrew and rotate the plastic tabs that are holding the screen in place.

Using the PH00 screwdriver unscrew and rotate the plastic tabs that are holding the screen in place.

Step 5

Before removing the screen from the cover, dissconnect the large gold ribbon cable by gently sliding the black tab out until it clicks.
Gently pull the ribbon cable from the port.

Before removing the screen from the cover, dissconnect the large gold ribbon cable by gently sliding the black tab out until it clicks.

Gently pull the ribbon cable from the port.

Step 6

Remove the screen from the device.

Remove the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Ian Swett

Member since: 03/11/2015

597 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Colorado Springs, Team 5-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 5-3, Panko Spring 2015 



                    UCCS-PANKO-S15S5G3                     


                                            3 Members                     


                                            12 Guides authored

maynell Rodrigues - Jun 10, 2016

Is the flex cable detachable from the LCD

Do u have the display flex cable

jnapps mu - Dec 25, 2016

how much does it cost for screen

Better Introduction#

What you need#

Team#

Better Introduction

What you need

Team