Difficulty
Easy
Steps
5
Time Required
15 - 30 minutes
Sections
1
- Camera
- 5 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackCoby Kyros MID9042
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- Before removing anything from the tablet, make sure to power off the device.
- After powering off device, remove the anti-slip pads from all 4 corners on the back of the device.
- Once slip pads are removed, proceed to unscrewing the four 3.2 mm Phillips #0 screws from the back cover.
Before removing anything from the tablet, make sure to power off the device.
After powering off device, remove the anti-slip pads from all 4 corners on the back of the device.
Once slip pads are removed, proceed to unscrewing the four 3.2 mm Phillips #0 screws from the back cover.
1024
Step 2
- When removing the back cover, be careful not to break the inner plastic tabs.
- Use the blue plastic opening tool to wedge the back cover apart from the front.
- Once the edges are wedged apart, use hands to lift up the back of the tablet.
When removing the back cover, be careful not to break the inner plastic tabs.
Use the blue plastic opening tool to wedge the back cover apart from the front.
Once the edges are wedged apart, use hands to lift up the back of the tablet.
Step 3
- Locate the gold flap and use tweezers to lift the flap up.
- Use a second pair of tweezers to pull the gold tab connected to the camera out of the circuit board.
- Once the tab is removed from the circuit board, pull the camera out of the tablet.
- Caution! Be sure to avoid pulling the gold flap off the the circuit board.
Locate the gold flap and use tweezers to lift the flap up.
Use a second pair of tweezers to pull the gold tab connected to the camera out of the circuit board.
Once the tab is removed from the circuit board, pull the camera out of the tablet.
Caution! Be sure to avoid pulling the gold flap off the the circuit board.
Step 4
- Tablets are made to give the consumer the freedom to do everything your smartphone or computer can do without the any of the extra additions needed during the time of purchase or other variants. Coby Electronics Corporation manufactured the Kyros line of tablets 2011. This company makes affordable devices for all to use.
Tablets are made to give the consumer the freedom to do everything your smartphone or computer can do without the any of the extra additions needed during the time of purchase or other variants. Coby Electronics Corporation manufactured the Kyros line of tablets 2011. This company makes affordable devices for all to use.
Step 5
- This product is great for children and young adults who like to play games or watch videos. It is also great for executives and other office related jobs, to help an individual stay organized and on top of their daily tasks.
This product is great for children and young adults who like to play games or watch videos. It is also great for executives and other office related jobs, to help an individual stay organized and on top of their daily tasks.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Samantha Rollings
Member since: 03/30/2015
349 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team 2-6, Shastany Spring 2015
Member of UMass Dartmouth, Team 2-6, Shastany Spring 2015
UMASSD-SHASTANY-S15S2G6
4 Members
6 Guides authored
