Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

2

  • The bottom portion of the DVD player
  • 3 steps
  • 4-Pin Ribbon Cable
  • 1 step

Flags

0

  • BackCoby DVD209

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              The bottom portion of the DVD player
  • Press the eject button to view the laser inside.
  • Using the blue plastic tool and the tweezers, remove the ribbon cable.

Press the eject button to view the laser inside.

Using the blue plastic tool and the tweezers, remove the ribbon cable.

1024

Step 2

  • Remove the six 1cm screws on the bottom of the device with the Phillips #1 screwdriver.
  • Do not lift the top of the DVD player too quickly because there are wires attached on the inside.
  • Pry the top of the device open from the right side where the buttons are located.

Remove the six 1cm screws on the bottom of the device with the Phillips #1 screwdriver.

Do not lift the top of the DVD player too quickly because there are wires attached on the inside.

Pry the top of the device open from the right side where the buttons are located.

Step 3

  • When pulling the ribbon cables out, make sure not to pull by the wires, as this can cause damage to them.
  • Pinch the plastic adapter with two fingers to remove the wires circled in red from the circuit board.

When pulling the ribbon cables out, make sure not to pull by the wires, as this can cause damage to them.

Pinch the plastic adapter with two fingers to remove the wires circled in red from the circuit board.

Step 4

              4-Pin Ribbon Cable
  • Position the DVD player so that the power and AVI ports are facing you.
  • Pull the white cable with the blue adapters off of the circuit boards.

Position the DVD player so that the power and AVI ports are facing you.

Pull the white cable with the blue adapters off of the circuit boards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Yufay Chow

Member since: 01/23/2012

92 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 10-36, Amido Winter 2012                        

                                                  Member of Cal Poly, Team 10-36, Amido Winter 2012 



                    CPSU-AMIDO-W12S10G36                     


                                            4 Members                     


                                            7 Guides authored