Difficulty

Moderate

Steps

8

Time Required

                          8 minutes

Sections

4

  • Windshield Bracket Mount
  • 4 steps
  • Buttonboard
  • 2 steps
  • Buttons
  • 1 step
  • Display Screen
  • 1 step

Flags

0

  • BackCobra SPX 5300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Windshield Bracket Mount
  • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

Remove the four 9.5 mm Phillips #0 screws from the back of the device.

1024

Step 2

  • Pull the black plastic back case off of the device.

Pull the black plastic back case off of the device.

Step 3

  • Lift up the motherboard and lay it flat next to the device.
  • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

Lift up the motherboard and lay it flat next to the device.

Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

Step 4

  • Remove the windshield bracket mount.

Remove the windshield bracket mount.

Step 5

              Buttonboard
  • Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

Step 6

  • Lift buttonboard to expose silver button plate.

Lift buttonboard to expose silver button plate.

Step 7

              Buttons
  • Remove the silver button plate by gripping one of the corners and pulling up.

Remove the silver button plate by gripping one of the corners and pulling up.

Step 8

              Display Screen
  • Lift the front black plastic display screen.

Lift the front black plastic display screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Fanny Auad

Member since: 09/25/2015

265 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       University of Tampa, Team 1-2, Whiteside Fall 2015                        

                                                  Member of University of Tampa, Team 1-2, Whiteside Fall 2015 



                    UT-WHITESIDE-F15S1G2                     


                                            4 Members                     


                                            5 Guides authored

Ancient warrior - Oct 31, 2017

Reply

Hi,

Cobra SPX 7800 BT - Radar Detector

Does anyone know where could I purchase or look for a replacement screen for a Cobra SPX 7800 Bt detector, mine came with several cracks on the bottom right hand corner. It works, beeps ok, no color screen display and therefore unable to change settings.

Thanks