Featured

Featured Guide

Difficulty

Easy

Steps

11

Time Required

                          15 - 20 minutes

Sections

4

  • Power Cable
  • 2 steps
  • Antenna Cable
  • 2 steps
  • Microphone
  • 2 steps
  • Outer Cover
  • 5 steps

Flags

2

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

This guide has been found to be exceptionally cool by the iFixit staff.

  • BackCobra 29 LTD Classic

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power Cable
  • Turn the power switch, the leftmost knob, counterclockwise to off.

Turn the power switch, the leftmost knob, counterclockwise to off.

1024

Step 2

  • Turn the device around and firmly pull the power cable plug to remove it from the radio.

Turn the device around and firmly pull the power cable plug to remove it from the radio.

Step 3

              Antenna Cable
  • Unscrew the securing cap counterclockwise from the antenna connector.

Unscrew the securing cap counterclockwise from the antenna connector.

Step 4

  • Gently pull the antenna cable to remove it from the back of the radio.

Gently pull the antenna cable to remove it from the back of the radio.

Step 5

              Microphone
  • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

Step 6

  • Gently unplug the microphone plug.

Gently unplug the microphone plug.

Step 7

              Outer Cover
  • Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.

Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.

Step 8

  • Gently life and remove the top cover.

Gently life and remove the top cover.

Step 9

  • Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio.
  • Carefully flip the radio over.

Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio.

Carefully flip the radio over.

Step 10

  • Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.

Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.

Step 11

  • Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far.
  • Gently lift and remove the case cover.

Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far.

Gently lift and remove the case cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Chase

Member since: 10/20/2013

267 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 11-37, Amido Fall 2013                        

                                                  Member of Cal Poly, Team 11-37, Amido Fall 2013 



                    CPSU-AMIDO-F13S11G37                     


                                            4 Members                     


                                            9 Guides authored