Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

3

  • Power Cable
  • 2 steps
  • Microphone
  • 2 steps
  • Knobs
  • 3 steps

Flags

0

  • BackCobra 29 LTD Classic

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power Cable
  • Turn the power switch, the leftmost knob, counterclockwise to off.

Turn the power switch, the leftmost knob, counterclockwise to off.

1024

Step 2

  • Turn the device around and firmly pull the power cable plug to remove it from the radio.

Turn the device around and firmly pull the power cable plug to remove it from the radio.

Step 3

              Microphone
  • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

Step 4

  • Gently unplug the microphone plug.

Gently unplug the microphone plug.

Step 5

              Knobs
  • Gently turn the middle four knobs counter-clockwise until they no longer move.
  • The middle four knobs are held in place by friction and do not have a way to keep them in the correct position. When reassembling the middle four knobs, make sure to line up the mark on the knob with the left-most mark on the front panel.

Gently turn the middle four knobs counter-clockwise until they no longer move.

The middle four knobs are held in place by friction and do not have a way to keep them in the correct position. When reassembling the middle four knobs, make sure to line up the mark on the knob with the left-most mark on the front panel.

Step 6

  • Insert two plastic opening tools behind the tuning knob.
  • With some force, pry the knob off of the radio.
  • Two opening tools are needed so that you don’t break the knob or connector by applying uneven force.

Insert two plastic opening tools behind the tuning knob.

With some force, pry the knob off of the radio.

Two opening tools are needed so that you don’t break the knob or connector by applying uneven force.

Step 7

  • Repeat the above procedure with the remaining knobs.
  • The final knob will have a power knob on the end of it. When reassembling, put the power knob on last.

Repeat the above procedure with the remaining knobs.

The final knob will have a power knob on the end of it. When reassembling, put the power knob on last.

To reassemble your device, align the buttons and push them on.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Matt Williams

Member since: 10/20/2013

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 11-37, Amido Fall 2013                        

                                                  Member of Cal Poly, Team 11-37, Amido Fall 2013 



                    CPSU-AMIDO-F13S11G37                     


                                            4 Members                     


                                            9 Guides authored