Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Cleaning the Skullcandy Mix Master DJ Adjustment Slider
- 4 steps
Flags
0
BackSkullcandy Mix Master DJ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cleaning the Skullcandy Mix Master DJ Adjustment Slider
- Remove the Skullcandy Mix Master DJ Headphones from any casing or protective gear.
Remove the Skullcandy Mix Master DJ Headphones from any casing or protective gear.
1024
Step 2
- Rotate the headphones so that one of the speaker cups are facing you. Remove the four Phillips 3 mm screws along the headband cover.
Rotate the headphones so that one of the speaker cups are facing you. Remove the four Phillips 3 mm screws along the headband cover.
Step 3
- Gently remove the cover from the headband.
- Removing the cover too fast could break the thin wire within the headband.
Gently remove the cover from the headband.
Removing the cover too fast could break the thin wire within the headband.
Step 4
- Using a moist Q-tip or small towel, carefully wipe the inside of the headband sheath.
- Be careful when cleaning to avoid damaging to the wire.
- Do not use cleaning solvents. They may cause the plastic to break down.
Using a moist Q-tip or small towel, carefully wipe the inside of the headband sheath.
Be careful when cleaning to avoid damaging to the wire.
Do not use cleaning solvents. They may cause the plastic to break down.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Seth Blackburn
Member since: 03/30/2015
110 Reputation
1 Guide authored
Badges:
2
Team
UMass Dartmouth, Team 1-3, Shastany Spring 2015
Member of UMass Dartmouth, Team 1-3, Shastany Spring 2015
UMASSD-SHASTANY-S15S1G3
3 Members
3 Guides authored