Difficulty
Very easy
Steps
5
Time Required
5 minutes
Sections
2
- Front and Rear Cover
- 4 steps
- Cleaning Function Buttons
- 1 step
Flags
0
BackCanon PowerShot SD1100 IS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front and Rear Cover
- Remove wrist strap and battery.
Remove wrist strap and battery.
1024
Step 2
- Remove 2 screws from each side of the camera (4 total, 0.102 in).
- Remove 2 screws from the bottom on the camera (0.138 in).
- Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
Remove 2 screws from each side of the camera (4 total, 0.102 in).
Remove 2 screws from the bottom on the camera (0.138 in).
Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
Step 3
- Gently pull off the front cover.
- The plate on the side should come off.
- Gently pull off the back cover.
Gently pull off the front cover.
The plate on the side should come off.
Gently pull off the back cover.
Step 4
- The cases should now be removed.
The cases should now be removed.
Step 5
Cleaning Function Buttons
- Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.
Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Tyler Grossheim
Member since: 01/25/2011
1,470 Reputation
6 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 3-32, Regan Winter 2011
Member of Cal Poly, Team 3-32, Regan Winter 2011
CPSU-REGAN-W11S3G32
3 Members
8 Guides authored
