Difficulty
Easy
Steps
2
Time Required
4 - 5 minutes
Sections
1
- Cleaning Debris from Flywheel Screen
- 2 steps
Flags
0
Back4-Stroke Small Gas Engine
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cleaning Debris from Flywheel Screen
- Ensure the engine is off and cooled down before starting this guide.
- Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.
- Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.
Ensure the engine is off and cooled down before starting this guide.
Using a 5/16" socket or wrench, remove the three bolts holding the plastic cover on to the engine.
Lift away the plastic cover. Note that the starter is attached to the cover and will come off with it.
1024
Step 2
- Using compressed air or a rag, clean debris from the flywheel.
Using compressed air or a rag, clean debris from the flywheel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Ethan Narad
Member since: 04/19/2018
529 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team S25-G15, Maness Spring 2018
Member of Cal Poly, Team S25-G15, Maness Spring 2018
CPSU-MANESS-S18S25G15
4 Members
7 Guides authored
