Difficulty

Easy

Steps

7

Time Required

                          15 - 45 minutes

Sections

2

  • Safety precautions
  • 4 steps
  • Blade
  • 3 steps

Flags

1

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

  • BackClassen Sod Cutter HSC18AHD (2018)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Safety precautions
  • Make sure the engine is off and cool to the touch before you proceed.

Make sure the engine is off and cool to the touch before you proceed.

1024

Step 2

  • Place wheel chocks against the roller and rear wheel to prevent the machine from moving.

Place wheel chocks against the roller and rear wheel to prevent the machine from moving.

Step 3

  • Flip the gas shutoff switch next to the motor to the left into the off position.

Flip the gas shutoff switch next to the motor to the left into the off position.

Step 4

  • Grab the plastic housing at the end of the spark plug wire.
  • Pull firmly to disconnect the wire from the spark plug.

Grab the plastic housing at the end of the spark plug wire.

Pull firmly to disconnect the wire from the spark plug.

Step 5

              Unbolt the cutter blade
  • Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the left side of the machine.
  • You may need to use a 1/2 inch wrench in combination with the socket wrench to hold the nuts in place.

Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the left side of the machine.

You may need to use a 1/2 inch wrench in combination with the socket wrench to hold the nuts in place.

Step 6

  • Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the right side of the machine.
  • You may need to use a 1/2 inch wrench in combination with the socket wrench to hold the nuts in place.

Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the right side of the machine.

Step 7

              Remove the cutter blade
  • Slide the cutter blade out from under the machine to remove it.
  • Do not handle the blade from the cutting edge.

Slide the cutter blade out from under the machine to remove it.

Do not handle the blade from the cutting edge.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Sam Omiotek

Member since: 02/25/2019

55,294 Reputation

                                      288 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Guide Team                        

                                                  Member of Guide Team 



                    Community                     


                                            10 Members                     


                                            9,216 Guides authored