Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
2
- Dust Bag
- 1 step
- Blower Housing
- 5 steps
Flags
0
BackAmerican Sanders Floor Sander 07014A (2012)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Dust Bag
- Before you begin, be sure that the sander is unplugged and powered off.
- Twist and pull the dust bag collar to disconnect it from the elbow pipe.
- Remove the dust bag.
Before you begin, be sure that the sander is unplugged and powered off.
Twist and pull the dust bag collar to disconnect it from the elbow pipe.
Remove the dust bag.
1024
Step 2
Blower Housing
- Peel the rubber sleeve down from the elbow pipe to reveal the pipe socket.
Peel the rubber sleeve down from the elbow pipe to reveal the pipe socket.
Step 3
- Grasp the elbow pipe with your hands and pull up while twisting to disconnect it from the blower housing.
- Remove the elbow pipe.
Grasp the elbow pipe with your hands and pull up while twisting to disconnect it from the blower housing.
Remove the elbow pipe.
Step 4
- Twist and pull to disconnect both suction hoses from the blower housing.
Twist and pull to disconnect both suction hoses from the blower housing.
Step 5
- Remove the four 22mm long Phillips screws around the side of the blower housing.
Remove the four 22mm long Phillips screws around the side of the blower housing.
Step 6
- Lift the blower housing upwards and slide it off of the blower assembly.
- Remove the blower housing.
Lift the blower housing upwards and slide it off of the blower assembly.
Remove the blower housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
Arthur Shi
Member since: 01/03/2018
211,865 Reputation
442 Guides authored
Badges:
46
+43 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored
