Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Cisco Aironet 1242 Dissasembly
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackReparación de Cisco Aironet 1242ag
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the screws
- The equipment cover is held by 4 screws.
The equipment cover is held by 4 screws.
1024
Step 2
Removing the cover
- Once the 4 screws are removed, push to the side to remove the cover.
Once the 4 screws are removed, push to the side to remove the cover.
Step 3
Disassembling the main board
- The card is attached to the bottom plate by 4 screws
- Before removing the logic board, disconnect the antenna cables in both parts of the device.
- There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.
The card is attached to the bottom plate by 4 screws
Before removing the logic board, disconnect the antenna cables in both parts of the device.
There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.
Step 4
Device disassembled
- Write the wisdom here.
Write the wisdom here.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Eneider Colina
[deleted]
Jesus Lau
shingle
Attached Documents
- product_data_sheet0900aecd8031.pdf
- PDF - 134.36 kb
- View
product_data_sheet0900aecd8031.pdf
PDF - 134.36 kb
Author
with 1 other contributor
Eneider Colina
Member since: 09/20/2013
2,332 Reputation
9 Guides authored
Badges:
20
+17 more badges
Team
Comunidad para traductores de español
Member of Comunidad para traductores de español
Community
18 Members
23 Guides authored