Difficulty

Easy

Steps

2

Time Required

                          5 minutes

Sections

1

  • Cisco 878 Integrated Services Router Top Cover Disassembly
  • 2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackCisco 878 Integrated Services Router

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the two screws on back side
  • Only trained and qualified personnel should be allowed to install, replace, or service this equipment!
  • During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself!
  • Make sure that the power switch is turned to standby and that the power supply cable is disconnected. Disconnect all cables from the router back panel.
  • Use the Phillips #1 Screwdriver to remove the two screws on back side of the device.

Only trained and qualified personnel should be allowed to install, replace, or service this equipment!

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself!

Make sure that the power switch is turned to standby and that the power supply cable is disconnected. Disconnect all cables from the router back panel.

Use the Phillips #1 Screwdriver to remove the two screws on back side of the device.

1024

Step 2

              Remove top cover
    1. Gently push the top cover of the router away from you.
    1. Lift it up top cover from the bottom of the router.
    1. Remove top cover from the device.
  • Place the router bottom on an antistatic mat.

  1. Gently push the top cover of the router away from you.

  2. Lift it up top cover from the bottom of the router.

  3. Remove top cover from the device.

Place the router bottom on an antistatic mat.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Jiri Altman

Member since: 05/03/2016

1,479 Reputation

                                      8 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges

Team

                       4k20 Repair Team                        

                                                  Member of 4k20 Repair Team 



                    Community                     


                                            2 Members                     


                                            16 Guides authored