Cirago M9030 Hard Drive Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes            

Sections

2

• Cover
• 3 steps
• Hard Drive
• 3 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackCirago M9030

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Cover               

• Using a Phillips #00 screwdriver, remove the four 1.1mm long screws from the top side.

Using a Phillips #00 screwdriver, remove the four 1.1mm long screws from the top side.

1024

Step 2

• Using a Phillips #00 screwdriver, remove the four 1.1mm long screws from the bottom side.
• Remove the warranty sticker across the bottom.

Using a Phillips #00 screwdriver, remove the four 1.1mm long screws from the bottom side.

Remove the warranty sticker across the bottom.

Step 3

• Gently lift off the back and front casing.
• The outer shell should easily come apart.

Gently lift off the back and front casing.

The outer shell should easily come apart.

Step 4

              Hard Drive               

• Make sure the device screen is face down.

Make sure the device screen is face down.

Step 5

• Using the plastic opening tool, wedge the tool underneath the bottom left edge of the hard drive.
• Raise the bottom edge of the hard drive 15 degrees up from the device.

Using the plastic opening tool, wedge the tool underneath the bottom left edge of the hard drive.

Raise the bottom edge of the hard drive 15 degrees up from the device.

Step 6

• Place fingers on the IDE connectors and gently slide the hard drive out from the IDE module.

Place fingers on the IDE connectors and gently slide the hard drive out from the IDE module.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Ryan Sutardji                     

Member since: 06/29/2012

171 Reputation

                                      7 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 1-4, Regan SU 2012                        

                                                  Member of Cal Poly, Team 1-4, Regan SU 2012 



                    CPSU-REGAN-SU12S1G4                     


                                            4 Members                     


                                            7 Guides authored