Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Speakers
  • 8 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackCingular 8125

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Tools

  • iFixit Opening Tool64 Bit Driver Kit

What you need

Step 1

              Speakers
  • Hold the phone with the back (camera side) facing you.
  • Press on the battery cover until it slides off.

Hold the phone with the back (camera side) facing you.

Press on the battery cover until it slides off.

1024

Step 2

  • Lift up the black tab that sticks out on the battery’s side until the battery is pulled out.
  • Using the iFixit Opening Tool, pull on the phone’s camera cover until it pops off.

Lift up the black tab that sticks out on the battery’s side until the battery is pulled out.

Using the iFixit Opening Tool, pull on the phone’s camera cover until it pops off.

Step 3

  • Remove the four black Torx head screws in each corner.

Remove the four black Torx head screws in each corner.

Step 4

  • Pull on the back cover of the phone with the iFixit opening tool until the green motherboard is revealed.

Pull on the back cover of the phone with the iFixit opening tool until the green motherboard is revealed.

Step 5

  • Remove the black plastic piece from the motherboard by gently pulling it off.
  • Align the white squares on the motherboard and the speakers.
  • You’ll know they are lined up correctly when the speaker’s wires face the motherboard’s center.
  • Press down on the white squares until they snap together.

Remove the black plastic piece from the motherboard by gently pulling it off.

Align the white squares on the motherboard and the speakers.

You’ll know they are lined up correctly when the speaker’s wires face the motherboard’s center.

Press down on the white squares until they snap together.

Step 6

  • Place the back cover of the phone over the motherboard.
  • Check to be sure the speaker’s black piece is against the holes in the back cover.

Place the back cover of the phone over the motherboard.

Check to be sure the speaker’s black piece is against the holes in the back cover.

Step 7

  • Screw the four Torx head screws with the 64 Bit Driver Handle to connect the back cover to the motherboard.
  • Press the camera cover down on the back cover until it snaps into place.

Screw the four Torx head screws with the 64 Bit Driver Handle to connect the back cover to the motherboard.

Press the camera cover down on the back cover until it snaps into place.

Step 8

  • Line up the copper terminal on the battery with the terminal on the phone, then press the battery back into place.
  • Make sure the black tab sticks out.
  • Slide the battery cover over the camera cover until it snaps back into place.

Line up the copper terminal on the battery with the terminal on the phone, then press the battery back into place.

Make sure the black tab sticks out.

Slide the battery cover over the camera cover until it snaps back into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Laura Kimberly Simonds

Member since: 09/24/2012

301 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       University of Maine, Team 1-1, Diaz Fall 2012                        

                                                  Member of University of Maine, Team 1-1, Diaz Fall 2012 



                    UMAINE-DIAZ-F12S1G1                     


                                            4 Members                     


                                            2 Guides authored