Cineyo Bt 03 Device Page Button Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          25 minutes            

Sections

2

• Cineyo BT-03 Device Disassembly
• 6 steps
• Button
• 3 steps

Flags

0

• BackCineyo BT-03

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cineyo BT-03 Device Disassembly               

• Remove the top (button side) rubber cover using your hands.

Remove the top (button side) rubber cover using your hands.

1024

Step 2

• Flip over the device and remove the bottom rubber cover using your hands.

Flip over the device and remove the bottom rubber cover using your hands.

Step 3

• Using your hands, pull off the plastic side cover (on the side with the audio jack) using the indented tab. The indented tab has been highlighted in the picture.

Using your hands, pull off the plastic side cover (on the side with the audio jack) using the indented tab. The indented tab has been highlighted in the picture.

Step 4

• Detach the plastic speaker cover on both the front and back sides. Then slide the cover off of the device.
• The cover should remain as one solid piece.

Detach the plastic speaker cover on both the front and back sides. Then slide the cover off of the device.

The cover should remain as one solid piece.

Step 5

• Remove the five 1 cm screws on the back side (opposite of the speakers) of the device using a Phillips #1 screwdriver.

Remove the five 1 cm screws on the back side (opposite of the speakers) of the device using a Phillips #1 screwdriver.

Step 6

• Gently pull apart the two sections of the device.

Gently pull apart the two sections of the device.

Step 7

              Button               

• With a Phillips #1 screwdriver, remove the two 5mm screws which attach the button mount to the plastic casing of the device.

With a Phillips #1 screwdriver, remove the two 5mm screws which attach the button mount to the plastic casing of the device.

Step 8

• Using a plastic opening tool, pry the button mount off of the plastic casing of the device.

Using a plastic opening tool, pry the button mount off of the plastic casing of the device.

Step 9

• Using a soldering iron and iFixit’s Soldering Guide, remove the individual buttons.

Using a soldering iron and iFixit’s Soldering Guide, remove the individual buttons.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Rene Klopf                     

Member since: 01/30/2017

463 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Baylor, Team 8-3, Whitney Spring 2017                        

                                                  Member of Baylor, Team 8-3, Whitney Spring 2017 



                    BU-WHITNEY-S17S8G3                     


                                            5 Members                     


                                            5 Guides authored