Chrysler Pacifica 2004 Water Pump Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

• Water Pump
• 5 steps

Flags

3

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackChrysler

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Water Pump               

• Disconnect battery cables from battery posts.

Disconnect battery cables from battery posts.

1024

Step 2

• Safely Jack up car to remove the passenger side front tire.
• Remove splash guard in wheel well by removing Phillips head screws around parameter and a few plastic clips.

Safely Jack up car to remove the passenger side front tire.

Remove splash guard in wheel well by removing Phillips head screws around parameter and a few plastic clips.

Step 3

              Remove air filter box               

• unscrew one fastener and disconnect any hoses to the engine.
• two additional ‘push-on’ connecting points on the underside.
• disconnect the baffles to the intake manifold(optional but makes much needed room)
• Remove sensor on the baffles which can be pulled off by first sliding a red tab on the electrical connection.

unscrew one fastener and disconnect any hoses to the engine.

 two additional ‘push-on’ connecting points on the underside. 

 disconnect the baffles to the intake manifold(optional but makes much needed room)

Remove sensor on the baffles which can be pulled off by first sliding a red tab on the electrical connection.

Step 4

              Drain coolant               

• Unscrew the white knob on the driver side bottom of the radiator.
• Remove fill cap to allow for quicker drain

Unscrew the white knob on the driver side bottom of the radiator.  

Remove fill cap to allow for quicker drain

Step 5

              Optional engine fan removal               

• Some people will remove the engine fan to allow for more working space.

Some people will remove the engine fan to allow for more working space.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Robert Torres                     

Member since: 06/02/2014

201 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge