Chromo Noria Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Back Panel
2 steps
Battery
3 steps

Flags

BackChromo Noria
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Insert your Plastic Opening Tool into the crease between the front panel and back panel.
Slide the Opening Tool around the entire device. As you progress, you should see the device open.

Insert your Plastic Opening Tool into the crease between the front panel and back panel.

Slide the Opening Tool around the entire device. As you progress, you should see the device open.

1024

Step 2

Carefully turn the device over.
Lay the back panel aside so you can see the device’s parts.

Carefully turn the device over.

Lay the back panel aside so you can see the device’s parts.

Step 3

              Battery

Place your finger at the end of the tape closest to the battery.
Peel the tape towards the flex cables to free the battery wires.

Place your finger at the end of the tape closest to the battery.

Peel the tape towards the flex cables to free the battery wires.

Step 4

Using the spudger tool, place the tool along an edge of the battery.
Be careful not to bend or break the battery! Batteries contain hazards materials.
Move the spudger around the edges of the battery to detach it from the tablet.

Using the spudger tool, place the tool along an edge of the battery.

Be careful not to bend or break the battery! Batteries contain hazards materials.

Move the spudger around the edges of the battery to detach it from the tablet.

Step 5

Soldering irons get very hot! Be careful when handling one. If you’d like a tutorial on how to use one, click here.
Using a soldering iron, desolder both of the battery wires. The battery’s wires are located to the left of the camera’s flex cable.
Remove the battery.

Soldering irons get very hot! Be careful when handling one. If you’d like a tutorial on how to use one, click here.

Using a soldering iron, desolder both of the battery wires. The battery’s wires are located to the left of the camera’s flex cable.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Kevin Nguyen

Member since: 10/31/2016

159 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Baylor, Team 5-6, Williams Fall 2016                        

                                                  Member of Baylor, Team 5-6, Williams Fall 2016 



                    BU-WILLIAMS-F16S5G6                     


                                            3 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team