Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

1

  • Case
  • 5 steps

Flags

0

  • BackChromecast

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case
  • Place the Google Chromecast face down (with text not showing) on a flat surface.
  • Insert a flat tool just above the micro-USB port to detach the top part of the case from the bottom.

Place the Google Chromecast face down (with text not showing) on a flat surface.

Insert a flat tool just above the micro-USB port to detach the top part of the case from the bottom.

1024

Step 2

  • Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.

Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.

Step 3

  • Remove the circuit board, lifting from the HDMI port.
  • The power button may become dislodged.

Remove the circuit board, lifting from the HDMI port.

The power button may become dislodged.

Step 4

  • Pry the plastic clamp from the heatsink.
  • Do not pry too hard to avoid breaking the clamp.

Pry the plastic clamp from the heatsink.

Do not pry too hard to avoid breaking the clamp.

Step 5

  • Insert a plastic opening tool under the heatsink, and pry the heatsink up and out of the case.
  • The adhesive’s strength may vary, and force should be applied gently until it becomes dislodged to avoid breaking the device.

Insert a plastic opening tool under the heatsink, and pry the heatsink up and out of the case.

The adhesive’s strength may vary, and force should be applied gently until it becomes dislodged to avoid breaking the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 1 other contributor 


                    Cameron Heiges

Member since: 03/21/2018

629 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S5-G6, Baechle Spring 2018                        

                                                  Member of IUPUI, Team S5-G6, Baechle Spring 2018 



                    IUPUI-BAECHLE-S18S5G6                     


                                            3 Members                     


                                            3 Guides authored

edgar arreola - Jun 21, 2019

Reply

que hacer si el pin de centro de carga se despredio como pegarlo o soldarlo?