Chevy Malibu Factory Backup Cam Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 minutes - 1 hour

Sections

Camera
6 steps

Flags

BackChevy Malibu Factory BackUp Cam
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Camera

Mount the new camera in the space provided.
The camera routes through the bumper of the car and not the license plate.

Mount the new camera in the space provided.

The camera routes through the bumper of the car and not the license plate.

1024

Step 2

Run the new wires through the holes provided, and cover with electrical tape.
The new cords will simply connect where the faulty wires were removed.

Run the new wires through the holes provided, and cover with electrical tape.

The new cords will simply connect where the faulty wires were removed.

Step 3

Coordinate the colored wires to keep the repair simple. Match the new wires to the existing wires through the splitter. Use a wire splitter to expose the wire.
Then simply connect the wires to the wires for reverse light.

Coordinate the colored wires to keep the repair simple. Match the new wires to the existing wires through the splitter. Use a wire splitter to expose the wire.

Then simply connect the wires to the wires for reverse light.

Step 4

The green wire is the camera connection or positive wire and the black is the ground.
This line should already be connected correctly because you should have only switched wires that connected to the camera.

The green wire is the camera connection or positive wire and the black is the ground.

This line should already be connected correctly because you should have only switched wires that connected to the camera.

Step 5

Make sure that the reverse light is working properly when the car is in reverse.

Make sure that the reverse light is working properly when the car is in reverse.

Step 6

Make sure the display is clear and working properly.

Make sure the display is clear and working properly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    LaTonya

Member since: 05/31/2017

158 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Arkansas State University, Team S1-G12, Chamberlain Summer 2017                        

                                                  Member of Arkansas State University, Team S1-G12, Chamberlain Summer 2017 



                    ARSU-CHAMBERLAIN-SU17S1G12                     


                                            1 Member                     


                                            1 Guide authored

jrselinger24 - Aug 26, 2018

The photos you show in steps 2 & 3 - is that the trunk only?

Jonathan Anderson - Jan 21, 2020

Hello. I am trying to replace my camera. But not sure how to remove it or where to buy a replacement.

Introduction#

What you need#

Team#

Introduction

What you need

Team