Chefman Rj38 V2 35 Power Cord Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          20 minutes

Sections

Power Cord
4 steps

Flags

BackChefman RJ38-V2-35
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Power Cord

Please be sure that the device is unplugged and remove the frying basket from the device.
Check the power cord for frays or cracks

Please be sure that the device is unplugged and remove the frying basket from the device.

Check the power cord for frays or cracks

1024

Step 2

If the cord appears to be fine, orient your device upside down so that the temperature knob is on the bottom and the power cord area is facing you.
Place your hand firmly on the device to prevent slippage.
Using the Phillips #1 screwdriver, remove the two 4 mm screws found at each corner of the bottom panel.

If the cord appears to be fine, orient your device upside down so that the temperature knob is on the bottom and the power cord area is facing you.

Place your hand firmly on the device to prevent slippage.

Using the Phillips #1 screwdriver, remove the two 4 mm screws found at each corner of the bottom panel.

Step 3

After removing the two screws on the bottom, remove the four 6mm screws located on the white tabs that are securing the power cord.
Once the white tabs come off, the power cord will be more visible, the white wire is connected with the blue wire, while the black wire is connected with the red wire.

After removing the two screws on the bottom, remove the four 6mm screws located on the white tabs that are securing the power cord.

Once the white tabs come off, the power cord will be more visible, the white wire is connected with the blue wire, while the black wire is connected with the red wire.

Step 4

Use a pair of scissor, cut off any secure wire attachments, such as the white capsule.
The wire will come apart and you can now separate the power cord from the device’s wires.
The red and blue wires of the device will show it’s aluminum strips, this is what connect to the replacement wire.

Use a pair of scissor, cut off any secure wire attachments, such as the white capsule.

The wire will come apart and you can now separate the power cord from the device’s wires.

The red and blue wires of the device will show it’s aluminum strips, this is what connect to the replacement wire.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor

                    An L Duong

Member since: 10/17/2018

271 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UW Tacoma, Team S1-G4, Rose Fall 2018                        

                                                  Member of UW Tacoma, Team S1-G4, Rose Fall 2018 



                    UWT-ROSE-F18S1G4                     


                                            4 Members                     


                                            3 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team