Char Broil Grill Burner Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Propane Heating Element
6 steps

Flags

BackBarbecue Grill
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Propane Heating Element

This is an exterior shot of the camping stove.
Make sure that you’re in a well lit area with towels under the stove to catch any dislodged residue.

This is an exterior shot of the camping stove.

Make sure that you’re in a well lit area with towels under the stove to catch any dislodged residue.

1024

Step 2

Remove the lid by pulling straight up on its attached handle.
Next remove the top grill grate.
Grab one side of the grate.
Pull up on that side till you can get your hand under the edge.
Using both hands fully remove the grate.

Remove the lid by pulling straight up on its attached handle.

Next remove the top grill grate.

Grab one side of the grate.

Pull up on that side till you can get your hand under the edge.

Using both hands fully remove the grate.

Step 3

Remove the heat distribution plate.
Place a hand on either side of the heat distribution plate and pull up.
The plate should pull straight out of the grill.

Remove the heat distribution plate.

Place a hand on either side of the heat distribution plate and pull up.

The plate should pull straight out of the grill.

Step 4

Turn the stove on its side so that the bottom is easily accessible.
There is a single Phillips Head screw to remove in the center of the stove’s bottom.
Fully remove this screw to detach the heating element from the main stove body.

Turn the stove on its side so that the bottom is easily accessible.

There is a single Phillips Head screw to remove in the center of the stove’s bottom.

Fully remove this screw to detach the heating element from the main stove body.

Step 5

Turn the stove back onto its legs after removing the bottom screw holding it.

Turn the stove back onto its legs after removing the bottom screw holding it.

Step 6

Before you can remove the heating element full you need to unscrew the propane vale on the exterior of the stove.
Pull up on the heating element, it should be free floating.
After the propane valve is unscrewed lift the old heating element out of the stove and replace it with the new part.

Before you can remove the heating element full you need to unscrew the propane vale on the exterior of the stove.

Pull up on the heating element, it should be free floating.

After the propane valve is unscrewed lift the old heating element out of the stove and replace it with the new part.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

Dan

Member since: 10/01/2017

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Michigan Tech, Team S5-G1, Galliah Fall 2017                        

                                                  Member of Michigan Tech, Team S5-G1, Galliah Fall 2017 



                    MTU-GALLIAH-F17S5G1                     


                                            3 Members                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team