Difficulty
Easy
Steps
2
Time Required
5 - 15 minutes
Sections
1
- random access memory
- 2 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
BackPackard Bell Easy Note TK85-GN-008GE
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Change memory
- Turn off the laptop completely.
- Remove the two Phillips # 000 screws and remove the cover.
- Use your fingers to undo the case on the bottom.
Turn off the laptop completely.
Remove the two Phillips # 000 screws and remove the cover.
Use your fingers to undo the case on the bottom.
1024
Step 2
- To the right of the already installed RAM modules, you will find the brackets that secure the RAM in the bracket. Press the two clips outwards.
- The Ram chip folds up slightly after unlocking and can then be easily removed. Repeat this process to remove the second RAM as well.
- Insert the new RAM and press it down with a little pressure, so that the memory is back in the holder.
To the right of the already installed RAM modules, you will find the brackets that secure the RAM in the bracket. Press the two clips outwards.
The Ram chip folds up slightly after unlocking and can then be easily removed. Repeat this process to remove the second RAM as well.
Insert the new RAM and press it down with a little pressure, so that the memory is back in the holder.
Repeat the steps in order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
irlanda is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
irlanda
Author
with 1 other contributor
Sandro
Member since: 07/11/2017
128 Reputation
1 Guide authored
Badges:
3
Team
iFixit EU Team
Member of iFixit EU Team
Community
51 Members
4,975 Guides authored
