Cen Tech Seven Function Digital Multimeter Screen Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 - 15 minutes            

Sections

2

• Mainboard
• 5 steps
• Screen
• 2 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackCen-Tech Digital Multimeter

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Position Device               

• Place the meter face down, and the back panel and screws can be seen.

Place the meter face down, and the back panel and screws can be seen.

1024

Step 2

              Remove Back Panel Screws               

• Unscrew the two 9mm screws on the back panel using a #0 Phillips screwdriver.

Unscrew the two 9mm screws on the back panel using a #0 Phillips screwdriver.

Step 3

              Remove Back Panel               

• Remove the back panel of the device by lifting upward.
• Remove the battery from the meter before continuing.

Remove the back panel of the device by lifting upward.

Remove the battery from the meter before continuing.

Step 4

              Unscrew Motherboard               

• Remove the four 7mm Phillips screws holding the circuit board in place.

Remove the four 7mm Phillips screws holding the circuit board in place.

Step 5

              Remove Motherboard               

• Gently lift the circuit board away from the device casing.
• Remove the battery after removing the back cover to reduce the chances of short-circuiting the circuit board.

Gently lift the circuit board away from the device casing.

Remove the battery after removing the back cover to reduce the chances of short-circuiting the circuit board.

Step 6

              Locate Screen               

• The screen is located at the top of the device.

The screen is located at the top of the device.

Step 7

              Remove Screen               

• Carefully remove screen from device by lifting upward.

Carefully remove screen from device by lifting upward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Anna Kihm                     

Member since: 10/13/2014

918 Reputation

                                      5 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges                           

Team

                       Clemson, Team 2-4, Benson Fall 2014                        

                                                  Member of Clemson, Team 2-4, Benson Fall 2014 



                    CLEM-BENSON-F14S2G4                     


                                            4 Members                     


                                            6 Guides authored                     

allwynrajkumar - Apr 27, 2016

Reply

my multimeter display is broken, where can i buy a new one?