Difficulty
Easy
Steps
5
Time Required
1 minute
Sections
2
- Skin Cover
- 3 steps
- Eyepiece Knob
- 2 steps
Flags
0
BackCelestron 71328 Nature DX 8x25
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Skin Cover
- Using a plastic opening tool, nylon spudger or metal spudger, pry into seam of the skin cover at the center of the device. Lightly lift the tool which should cause the skin cover to rise.
Using a plastic opening tool, nylon spudger or metal spudger, pry into seam of the skin cover at the center of the device. Lightly lift the tool which should cause the skin cover to rise.
1024
Step 2
- Start peeling the skin away from the center. Apply force as there is an adhesive substance that is binding the skin to the device. Continue peeling until skin cover slides off completely.
Start peeling the skin away from the center. Apply force as there is an adhesive substance that is binding the skin to the device. Continue peeling until skin cover slides off completely.
Step 3
- Repeat steps 1 and 2 for the other side.
Repeat steps 1 and 2 for the other side.
Step 4
Eyepiece Knob
- Twist the eyepiece knob counter-clockwise until it starts coming off.
Twist the eyepiece knob counter-clockwise until it starts coming off.
Step 5
- Repeat Step 1 for the other side if necessary.
Repeat Step 1 for the other side if necessary.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Bryce Colangelo
Member since: 02/15/2017
525 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
USF Tampa, Team S6-G6, Lacy Spring 2017
Member of USF Tampa, Team S6-G6, Lacy Spring 2017
USFT-LACY-S17S6G6
4 Members
5 Guides authored
