Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • Skin Cover
  • 3 steps
  • Control Arm
  • 2 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackCelestron 71328 Nature DX 8x25

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Skin Cover
  • Using a plastic opening tool, nylon spudger or metal spudger, pry into seam of the skin cover at the center of the device. Lightly lift the tool which should cause the skin cover to rise.

Using a plastic opening tool, nylon spudger or metal spudger, pry into seam of the skin cover at the center of the device. Lightly lift the tool which should cause the skin cover to rise.

1024

Step 2

  • Start peeling the skin away from the center. Apply force as there is an adhesive substance that is binding the skin to the device. Continue peeling until skin cover slides off completely.

Start peeling the skin away from the center. Apply force as there is an adhesive substance that is binding the skin to the device. Continue peeling until skin cover slides off completely.

Step 3

  • Repeat steps 1 and 2 for the other side.

Repeat steps 1 and 2 for the other side.

Step 4

              Control Arm
  • Locate the panels in front of the binoculars between the middle axle and the viewing lens and simply pry them off with your fingers

Locate the panels in front of the binoculars between the middle axle and the viewing lens and simply pry them off with your fingers

Step 5

  • Using a flathead screwdriver, unscrew the highlighted screwhead for the control arm.
  • With your fingers, grab the screw head and pull it out completely once it’s unscrewed and replace it with the new control arm if needed.
  • Parts revealed will be heavily lubricated. Consider wearing gloves.

Using a flathead screwdriver, unscrew the highlighted screwhead for the control arm.

With your fingers, grab the screw head and pull it out completely once it’s unscrewed and replace it with the new control arm if needed.

Parts revealed will be heavily lubricated. Consider wearing gloves.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Bryce Colangelo

Member since: 02/15/2017

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S6-G6, Lacy Spring 2017                        

                                                  Member of USF Tampa, Team S6-G6, Lacy Spring 2017 



                    USFT-LACY-S17S6G6                     


                                            4 Members                     


                                            5 Guides authored