Ccm Ice Skates Steel Blade Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Steel Blade On CCM Skates
9 steps

Flags

BackIce Skates
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Steel Blade On CCM Skates

Place the palm of one hand over the laces at the middle of the skate boot.
Close that palm and firmly grasp the skate.
Use the other hand to grab and remove any skate guard.

Place the palm of one hand over the laces at the middle of the skate boot.

Close that palm and firmly grasp the skate.

Use the other hand to grab and remove any skate guard.

1024

Step 2

Place the heel/back portion of the skate on the table.
Firmly grasp the toe of the skate with one hand.
Insert the flat head screwdriver from a multi-tool into the groove of the first screw and hold.

Place the heel/back portion of the skate on the table.

Firmly grasp the toe of the skate with one hand.

Insert the flat head screwdriver from a multi-tool into the groove of the first screw and hold.

Step 3

Using multi-tool pliers, grab hold of the fastener on the other side of the first screw.
Turn the flat head screwdriver in a counter clockwise rotation until it is loose.

Using multi-tool pliers, grab hold of the fastener on the other side of the first screw.

Turn the flat head screwdriver in a counter clockwise rotation until it is loose.

Step 4

Remove the loosened screw from the white plastic blade holder.
Insert the screwdriver into the fastener and apply pressure to remove the fastener.

Remove the loosened screw from the white plastic blade holder.

Insert the screwdriver into the fastener and apply pressure to remove the fastener.

Step 5

Place the heel/back portion of the skate on the table.
Firmly grasp the toe of the skate with one hand.
Insert the flat head screwdriver from a multi-tool into the groove of the second screw and hold.

Insert the flat head screwdriver from a multi-tool into the groove of the second screw and hold.

Step 6

Using multi-tool pliers, grab hold of the fastener on the other side of the second screw.
Turn the flat head screwdriver in a counter clockwise rotation until it is loose.

Using multi-tool pliers, grab hold of the fastener on the other side of the second screw.

Step 7

Step 8

Wrap a hand in a cloth towel.
Pinch the two flat sides of the metal blade between the thumb and index finger.
Do not touch the bottom or edges of the blade.

Wrap a hand in a cloth towel.

Pinch the two flat sides of the metal blade between the thumb and index finger.

Do not touch the bottom or edges of the blade.

Step 9

Apply pressure to the sides of the blade with your fingers.
Slowly pull the blade upward.
To avoid injury, do not pull the blade up in one quick motion.

Apply pressure to the sides of the blade with your fingers.

Slowly pull the blade upward.

To avoid injury, do not pull the blade up in one quick motion.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Steven  Marcyan

Member since: 10/04/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Michigan Tech, Team S5-G9, Galliah Fall 2017                        

                                                  Member of Michigan Tech, Team S5-G9, Galliah Fall 2017 



                    MTU-GALLIAH-F17S5G9                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team