Cassida Counterfeit Detector Motor Band Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 minutes            

Sections

2

• Cassida Counterfeit Detector Disassembly
• 6 steps
• Motor Band
• 2 steps

Flags

3

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCassida Counterfeit Detector

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Cassida Counterfeit Detector Disassembly               

• Remove the rubber legs.

Remove the rubber legs.

1024

Step 2

• Using a Phillips #1 bit, remove the circled screws.

Using a Phillips #1 bit, remove the circled screws.

Step 3

• Pry the top cover off, starting from the side with the switch, with a metal spudger.

Pry the top cover off, starting from the side with the switch, with a metal spudger.

Step 4

• Pop the 4 tabs on the top of the machine up with a metal spudger and then remove the 2 side panels.

Pop the 4 tabs on the top of the machine up with a metal spudger and then remove the 2 side panels.

Step 5

• Disconnect the wires circled and then remove the top section from the bottom section just by pulling the top section straight up and holding onto the bottom.

Disconnect the wires circled and then remove the top section from the bottom section just by pulling the top section straight up and holding onto the bottom.

Step 6

• All the parts disassembled.

All the parts disassembled.

Step 7

              Motor Band               

• This is the band you will be replacing. If it is broken or loose, remove from the device completely.

This is the band you will be replacing. If it is broken or loose, remove from the device completely.

Step 8

• Install new band by placing it around the small grey pulley and then working it around the larger black pulley.

Install new band by placing it around the small grey pulley and then working it around the larger black pulley.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    TREVOR j NELMS                     

Member since: 10/30/2019

543 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of Memphis, Team S2-G2, Kim Fall 2019                        

                                                  Member of University of Memphis, Team S2-G2, Kim Fall 2019 



                    UM-KIM-F19S2G2                     


                                            4 Members                     


                                            5 Guides authored