Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Battery
- 3 steps
Flags
0
BackWatch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a Phillips #00 screwdriver to remove the four screws from the back of the watch.
- Remove the back cover of the watch.
Use a Phillips #00 screwdriver to remove the four screws from the back of the watch.
Remove the back cover of the watch.
1024
Step 2
- Use the tweezers to pull the small metal piece to the right slightly to allow the battery to pop out.
- Replace battery with a SR626SW watch battery.
- The battery may spring out very suddenly.
- If your battery is swollen, handle it with care and dispose of it through an e-waste center or ask an electronics store. Do not dispose of it in the garbage.
Use the tweezers to pull the small metal piece to the right slightly to allow the battery to pop out.
Replace battery with a SR626SW watch battery.
The battery may spring out very suddenly.
If your battery is swollen, handle it with care and dispose of it through an e-waste center or ask an electronics store. Do not dispose of it in the garbage.
Step 3
- If the rubber seal pops out, realign the rubber seal with the groove along the back face.
If the rubber seal pops out, realign the rubber seal with the groove along the back face.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jasmyn McBeth
Member since: 09/08/2021
97 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Embry-Riddle Aeronautical University, Team 9-14, Rauch Fall 2021
Member of Embry-Riddle Aeronautical University, Team 9-14, Rauch Fall 2021
ERAU-RAUCH-F21S9G14
2 Members
1 Guide authored
