Casio G Zone Commando Verizon Mil Spec Camera Replacement Repair Guide

Difficulty

Very difficult

Steps

9

Time Required

                          10 - 15 minutes            

Sections

3

• Battery
• 3 steps
• Motherboard
• 4 steps
• Camera
• 2 steps

Flags

0

• BackCasio G’zOne Commando Verizon MIL-SPEC

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Slide the slider on the back of the phone to the free position.

Slide the slider on the back of the phone to the free position.

1024

Step 2

• Using a plastic opening tool, gently lift open the back panel from bottom of the panel.

Using a plastic opening tool, gently lift open the back panel from bottom of the panel.

Step 3

• Pull the white battery tab upwards and remove the battery.

Pull the white battery tab upwards and remove the battery.

Step 4

              Motherboard               

• Remove the four 6mm Y0 screws from the corners of the device.

Remove the four 6mm Y0 screws from the corners of the device.

Step 5

• Remove the four 5mm Y0 screws from the back of the device.

Remove the four 5mm Y0 screws from the back of the device.

Step 6

• Using a spudger, pry away the motherboard from its compartment, by inserting the spudger in the compartment and lifting upwards until fully out.

Using a spudger, pry away the motherboard from its compartment, by inserting the spudger in the compartment and lifting upwards until fully out.

Step 7

• Lastly, using your hands, separate the motherboard from its compartment.

Lastly, using your hands, separate the motherboard from its compartment.

Step 8

              Camera               

• Using a spudger, gently lift up the orange connector.

Using a spudger, gently lift up the orange connector.

Step 9

• Flip over the motherboard
• Using a spudger, lift up the small black connector and remove the camera.

Flip over the motherboard

Using a spudger, lift up the small black connector and remove the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Zack Almeida                     

Member since: 10/24/2018

392 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team S3-G7, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S3-G7, Peak Fall 2018 



                    UMASSD-PEAK-F18S3G7                     


                                            3 Members                     


                                            8 Guides authored